6902-2RS Bearings 15x28x7mm | MTB Suspension Pivot | Set of 4 | Smooth

Description

Will this work?

• 6902-2RS standard: 15mm ID, 28mm OD, 7mm wide
• Dual rubber sealed, pre-greased
• Fits MTB suspension pivots, swing arms, wheel hubs
• Matches DT Swiss, Santa Cruz, Trek, Specialized and many other pivot specs
• Rubber seals intact on all 4 bearings
• Set of 4 included

Condition: Very good — surface oxidation visible on the outer races from storage/exposure, but all four bearings spin smoothly with no roughness, catching, or play. Seals are intact. Oxidation is cosmetic and does not affect function.

Notes from MyBikeThing The 6902-2RS is one of the most common MTB suspension pivot bearings out there — used in swing arms, linkage pivots, and wheel hubs across dozens of brands. These spin smooth, which is the only thing that matters. The surface rust is cosmetic; the races and balls are doing their job. Selling as a set of 4 — enough for a full pivot rebuild on most bikes.

Workshop Wisdom Before pressing in used bearings, confirm spin smoothness by holding the outer race and spinning the inner — it should be fluid with no grinding or notchiness. A light wipe with a clean rag removes the surface oxidation without affecting function. Press bearings in evenly using a bearing press or a socket that matches the outer race diameter — never press on the inner race.

Guarantee You put in the miles, we put in the work! 30 day Guarantee, rest assured of fit, function and condition 🙂

Keywords 6902-2RS bearing, 15x28x7 bearing, MTB suspension pivot bearing, swing arm bearing, linkage bearing, mountain bike pivot bearing, sealed ball bearing, 6902 2RS set, bicycle suspension rebuild, wheel hub bearing